The Russian Mosin Nagant Forum

So I got this AK type gas tube - hand guard along with a buttstock at least 30 years ago. Up until recently I have never tried to install on a rifle. To be able to install I understand that slight fitting might be acquired but in this case I would have to cut alot off gas tube . This piece has a total length of 7 and 8/16ths inches. I was wondering if anyone could help me identify?

BULGARIAN 5.45 AK-74………………………………………………………………………. 6.970
MAADI 7.62X39………………………………………………………………………………… 6.970
HUNGARIAN SA2000M 7.62X39……………………………………………………………… 5.740
HUNGARIAN AMD 65 …………………………………………………………………………. 5.770
HUNGARIAN AMD 63…………………………………………………………………………... 6.940
ROMANIAN G …………………………………………………………………………………... 6.970
YUGOSLAVIAN AB2………………………………………………………………………….. 7.540
YUGOSLAVIAN VIRGIN KRINK……………………………………………………………... 6.060
YUGOSLAVIAN M72 RPK…………………………………………………………………….. 7.530
RUSSIAN MILLED AK-47……………………………………………………………………… 6.970
ROB. ARMS VEPR 7.62X39…………………………………………………………………….. 6.970
POLISH U/F 7.62X39…………………………………………………………………………... 6.970
POLISH TANTAL 5.45X39……………………………………………………………………. 6.980
MAK 90 7.62X39 U/F…………………………………………………………………………... 6.980
MILLED TYPE 56 7.62X39…………………………………………………………………….. 6.980

Thank you for the list mogunner !

I didn't even have an idea that there were so many different lengths until I started looking. Good info to have!

Every AK spare part expects fitting - good to help compensate wearing.

It's not for an AK-47/AKM of the familiar Russian pattern. The hand guard is way too long not to mention has 3 cooling slots and not two as per the standard.

Looks like a Yugo M76 or N/O-PAP (M70) gas tube.

I had no idea that list would be long ? It kinda makes sense being some of the 74's have a spring ?